Hear Technologies
about Hear Technologiescontactdownloadstech supportpress resourcessales reps
hear backmix backfreedom backheadsetsaccessories
hear back
system features
mixer features
hub features


hear back PRO mixer

Hear Back PRO Mixer Features:

  • Local control of up to 18 channels of audio
    (16 mono channels + AUX IN + Intercom IN)
  • Receive power and audio over one Ethernet cable, up to 500’ from Hub to each Mixer
  • 24-bit Delta-Sigma D/A and A/D converters
  • Volume/panning/stereo link control of all
    16 channels of audio
  • Store up to 4 recallable presets
  • Intercom allows communication to anyone with a Hear Back PRO Mixer
  • Selectable 1/8” TRS stereo unbalanced and XLR mono balanced (with 15V phantom power) AUX inputs:
    – Microphone input for crowd / ambiance mic or intercom use
    – Drum module / metronome or
    local mix input
  • 1/8” and 1/4” headphone jacks
  • Balanced mono/stereo, line level outputs

Hear Back PRO Mixer

specifications
product sheet

 

 


Mounting the Mixer

The Hear Back Mixer is equipped to mount to any standard mic or desk stand using the built-in 5/8" threaded socket located on the back of the mixer.

 

Mic Stand Mount


The Mic Stand Adapter (Order Number: MSA) is perfect for mounting the Hear Back Mixer to the side of any mic stand. This clamp-on adjustable width bracket will attach to a standard music stand as well. The perfect companion to the Hear Back Mixer (HBM) and the Mix Back Talk Back Remote Control (MBR).
Mic Stand Adapter Extension Bar
 
The Mixer Tilt Adapter (Order Number: MTA) is for all Hear Back Mixers adding a ball joint with 5/8”-27 male threading to any standard mic stand to get the perfect angle with 360° rotation and 180° tilt.
Mixer Tilt Adapter
 
 

accessories

 
 

PRO intercom footswitch

The PRO Intercom Footswitch allows one microphone to double as both a vocal mic and an intercom mic for the Hear Back PRO Mixer. Our Footswitch allows for hands-free switching between a vocal mic over the PA and intercom communication within a Hear Back PRO system, all over the same microphone. The footswitch can also be used in any application where a momentary A/B XLR switch is needed.

  • (1) female XLR input for the microphone and (2) male XLR outputs for allow you to connect to the PA system (or studio console) and a Hear Back PRO Mixer
  • All outputs are transformer isolated
  • PA connection passes phantom power to the microphone input with a bypass diode to power up condenser mics
  • Does not require any external power or battery
PRO Intercom Footswitch
 

AM12 ambient mic

(Order Number: AM12) The AM12 Ambient Microphone is a 12 inch podium-style, condenser gooseneck mic with super cardioid pattern for use with Hear Back PRO Mixer (PROHBM) as an ambient or intercom microphone.

The AM12 features 15 volt phantom power, 30hz – 16khz frequency response, and -40db sensitivity.

AM12 Ambient Mic
  View more system accessories