Skip to main content

System Notes

  • If the PLUS detects that the headphone amplifier is over-heating, which is typically caused by a short-circuit in the headphones or headphone connector, it will display a RED flashing logo. The headphone amplifier will continue to work, but you should unplug the headphones and turn down the master volume to allow it to cool off. Then try a different pair of headphones.
  • Gigabit Ethernet speed is recommended. Dante networks also support 100 Mbps networks, but gigabit is required for higher channel counts and lower latency.

CAT6 Cables​

Cable complying with the National authorities (cable with an outer jacket or sleeving rated VW-1 or better).